
For a limited time Pacific Wilderness is offering
instant rebates of $100.00 on in stock Apeks Regulators.
The Rebate is Simple and Instant. Just
purchase one of the models listed below, fill out a rebate form and we'll knock $100 off
your purchase price on the spot!
Apeks
ATX200
The ATX 200 is the "Flagship" of the Apeks line of regulators.This
feature-rich, high performance regulator, with its restyled 1st stage and smaller 2nd
stage, is the perfect regulator for any diving environment.
First Stage
- Over-balanced first stage actually increases interstage pressure as you go deeper,
compensating for the denser air.
- The high-gloss black chrome gives the first stage a rich look.
- The first stage comes standard with a unique "dry" environmental sealing
system that completely eliminates the need for messy silicone oil or grease filling. It is
designed for use in all water conditions. It is ideal for professional use and for diving
in cold or contaminated conditions.
- The unique layout of the first stage with its upswept medium pressure ports allows for
ideal positioning of the hoses.
- Also available with a DIN connection system.
Second Stage
- The new ATX 200 second stage is small and light. This results in less jaw fatigue and
less drag.
- Improved exhaust gas flow reduces exhalation resistance and therefore, the overall work
of breathing of the regulator.
- The ATX 200 second stage uses a pneumatically balanced valve system and is the most
advanced diver adjustable breathing system available. Independent performance tests have
established that this regulator can supply air within the recommended limits of breathing
resistance to a depth in excess of 230 ft.
- The ATX 200 has ergonomically designed diver adjustable controls for opening effort and
venturi assistance allowing the diver to tune the breathing characteristics of the
regulator to give virtually ideal breathing. No fixed or preset system can achieve an
ideal level of breathing performance under all conditions.
- The ATX 200 second stage is suitable for use in all diving conditions. Because of its
high efficiency heat exchanger system, it can cope with even the coldest conditions
without freezing, making it the perfect all round regulator.
- Comes standard with the Comfo-bite mouthpiece for increased comfort.
Back
to Top
Apeks ATX50

The ATX50 Regulator is for the
discriminating diver who wants the benefits of a feature-rich regulator at a moderate
price.
- High performance regulator that boasts an over-balanced first
stage with a pneumatically balanced second stage.
- Four medium pressure ports are located on a swivel turret to
reduce tension on the hoses. The 1/2" primary port is enlarged for maximum flow.
- Two high-pressure ports are available for redundancy.
- The first stage is dry sealed keeping all internal components
protected from the environment.
- Also available with a DIN connection.
- The new ATX50 second stage is smaller and 25% lighter than its
TX50 predecessor. This results in less jaw fatigue and less drag.
- Improved exhaust gas flow reduces exhalation resistance and
therefore, the overall work of breathing of the regulator.
The ATX50 second stage uses a peneumatically
balanced valve system and is the most advanced diver adjustable breathing system
available.
The ATX50 has ergonomically designed diver adjustable controls for
opening effort and venturi assistance allowing the diver to tune the breathing
characteristics of the regulator to give virtually ideal breathing. No fixed or present
system can achieve an ideal level of breathing performance under all conditions.
The ATX50 second stage is suitable for use in all diving
conditions. Because of its high efficiency heat exchanger system, it can cope with even
the coldest conditions without freezing, making it the perfect all round regulator.
Comes standard with the Comfo-bite mouthpiece for increased
comfort.
Back to Top



From May 1st through July 31st, 2004 Pacific
Wilderness is offering Mail-In rebates of up to $70.00 on in stock Scubapro
Regulators.
The Rebate is Simple. Just purchase one of
the models listed below, fill out Scubapro's rebate form and mail it in with a copy of
your Sales Receipt & Original Registration Card and Scubapro will Mail a Check
Directly to you within 4-6 Weeks!
MK25T/S600T

MK25T First Stage
- Solid Titanium body and components, forged Titanium yoke
- Patented over-balanced composite/stainless steel piston
- TIS (Thermal Insulating System) on piston and spring
- Externally adjustable intermediate pressure (patent pending)
- New wound conical single stainless steel wire filter
- Enlarged water balancing chamber holes
- 5 High flow low pressure swivel ports
- Dual high pressure ports
- Available in yoke or DIN (not shown) configurations
S600T Second Stage
- Technopolymer body and components
- Peak performance air balancing system
- Air-balanced linear-flow valve
- Automatic anti-set feature
- Diver-adjustable VIVA
- High-flow exhaust valve
- Diver-adjustable inhalation effort control
- Lightweight, compact size
- Ergonomic, safegrip mouthpiece
Back
to Top
MK25AF/S600

MK25 First Stage
- Machined marine grade chrome plated brass body
- Patented over-balanced composite/stainless steel piston
- TIS (Thermal Insulating System) on piston and spring
- Externally adjustable intermediate pressure (patent pending)
- New conical single stainless steel wire filter
- Enlarged water balancing chamber holes
- 5 High flow low pressure swivel ports
- Dual high pressure ports
- Available in yoke or DIN (not shown) configurations
S600 Second Stage
- Technopolymer body and components
- Peak performance air balancing system
- Air-balanced linear-flow valve
- Automatic anti-set feature
- Diver-adjustable VIVA
- High-flow exhaust valve
- Diver-adjustable inhalation effort control
- Lightweight, compact size
- Ergonomic, safegrip mouthpiece
Back
to Top
MK25AF/G250HP

MK25 First Stage
- Machined marine grade chrome plated brass body
- Patented over-balanced composite/stainless steel piston
- TIS (Thermal Insulating System) on piston and spring
- Externally adjustable intermediate pressure (patent pending)
- New conical single stainless steel wire filter
- Enlarged water balancing chamber holes
- 5 High flow low pressure swivel ports
- Dual high pressure ports
- Available in yoke or DIN (not shown) configurations
G250HP Second Stage
- Technopolymer body and components
- Peak performance air balancing system
- Air-balanced linear-flow valve
- Automatic anti-set feature
- Diver-adjustable VIVA
- Diver-adjustable inhalation effort control
- High-flow exhaust valve
- Ergonomic, safegrip mouthpiece
Back
to Top
MK2Plus/R190

MK2 PLUS First Stage
- Standard piston technology
- TIS (Thermal Insulating System)
- 4 Low pressure ports
- Single high pressure port
- Available in yoke or DIN (not shown) configurations
R190 Second stage
- Classic downstream valve
- Diver adjustable VIVA
- Reversible low pressure hose attachment
- Classic purge valve
- High flow exhaust valve
Back
to Top
ScubaPro
Air2

- Single hose configuration
- Classic downstream valve
- Air-balanced power inflator valve
- Self-flushing mechanism
- One hand operation
- Replaces your B.C.'s Power Inflator & Octopus
Back
to Top